main.c

@@ -1,25 +0,0 @@
-#include <stdint.h>
-#include "config.h"
-#include <avr/io.h>
-#include <util/delay.h>
-#include <avr/interrupt.h>
-#include "uart_hal.h"
-
-
-int main(void)
-{
-	//example
-	uint8_t data = 'A';
-
-	uart_init(9600,0);
-    uart_send_byte(data);
-	sei();
-    while (1) 
-    {
-		if(uart_read_count() > 0){
-			data = uart_read();
-			uart_send_byte(data);
-		}
-
-    }
-}

uart_module.c

@@ -1,82 +0,0 @@
-#include "uart_hal.h"
-
-volatile static uint8_t rx_buffer[RX_BUFFER_SIZE] = {0};
-volatile static uint16_t rx_count = 0;
-volatile static uint8_t uart_tx_busy = 1;
-// кольцевой буффер
-ISR(USART_RX_vect){
-	
-	volatile static uint16_t rx_write_pos = 0;
-	
-	rx_buffer[rx_write_pos] = UDR0;
-	rx_count++;
-	rx_write_pos++;
-	if(rx_write_pos >= RX_BUFFER_SIZE){
-		rx_write_pos = 0;
-	}
-	
-}
-
-
-ISR(USART_TX_vect){
-	uart_tx_busy = 1;
-}
-
-
-void uart_init(uint32_t baud,uint8_t high_speed){
-	
-	uint8_t speed = 16;
-	
-	if(high_speed != 0){
-		speed = 8;
-		UCSR0A |= 1 << U2X0;
-	}
-	
-	baud = (F_CPU/(speed*baud)) - 1;
-	
-	UBRR0H = (baud & 0x0F00) >> 8;
-	UBRR0L = (baud & 0x00FF);
-	
-	UCSR0B |= (1 << TXEN0) | (1 << RXEN0) | (1 << TXCIE0) | (1 << RXCIE0);
-	
-}
-
-
-void uart_send_byte(uint8_t c){
-	while(uart_tx_busy == 0);
-	uart_tx_busy = 0;
-	UDR0 = c;
-}
-
-void uart_send_array(uint8_t *c,uint16_t len){
-	for(uint16_t i = 0; i < len;i++){
-		uart_send_byte(c[i]);
-	}
-}
-
-void uart_send_string(uint8_t *c){
-	uint16_t i = 0;
-	do{
-		uart_send_byte(c[i]);
-		i++;
-		
-	}while(c[i] != '\0');
-	uart_send_byte(c[i]);
-}
-
-uint16_t uart_read_count(void){
-	return rx_count;
-}
-
-uint8_t uart_read(void){
-	static uint16_t rx_read_pos = 0;
-	uint8_t data = 0;
-	
-	data = rx_buffer[rx_read_pos];
-	rx_read_pos++;
-	rx_count--;
-	if(rx_read_pos >= RX_BUFFER_SIZE){
-		rx_read_pos = 0;
-	}
-	return data;
-}

uart_module.h

@@ -1,20 +0,0 @@
-#ifndef UART_HAL_H_
-#define UART_HAL_H_
-
-
-#include <stdint.h>
-#include "config.h"
-#include <avr/io.h>
-#include <util/delay.h>
-#include <avr/interrupt.h>
-
-#define RX_BUFFER_SIZE 128
-
-void uart_init(uint32_t baud,uint8_t high_speed);
-void uart_send_byte(uint8_t c);
-void uart_send_array(uint8_t *c,uint16_t len);
-void uart_send_string(uint8_t *c);
-uint16_t uart_read_count(void);
-uint8_t uart_read(void);
-
-#endif /* UART_HAL_H_ */